Do you have problems with the way your Audi is displaying information on the digital dashboard? Maybe you notice the screen flashes, turns off every now and then, or displays the wrong information. These problems can be quite annoying, especially when you depend on the dashboard to know the status of your vehicle.

But don’t worry—Audi digital dashboard problems are common, and with a little know-how, you can often diagnose and even fix some of the issues yourself or with the help of a professional. Let’s see tips from Audi specialists on how to resolve digital dashboard problems and where you should take your vehicle if you need professional assistance.

Tips On How To Troubleshoot Digital Dashboard Problems

• Check Power Source: The first step is to take a look at your Audi battery and its alternator since they are the power source of the digital dashboard. A bad battery or a faulty alternator can lead to the blinking, freezing, or blanking out of the dashboard. If you suspect that the problem lies with the power source, one way to clear suspicion is to measure the voltage of your battery using a multimeter. Any reading below the normal voltage means you should change the battery or get the alternator checked out.
• Restart Your Vehicle: You might be surprised to hear that the simplest fix for your Audi dashboard issue is a reset. Switching off your car and then switching it back on again may solve common problems that could be affecting your vehicle’s dashboard. It is like restarting a computer; it deals effectively with many small software issues.
• Check for Software Updates: Just like your smartphone or a computer, your Audi comes equipped with digital displays that use software that must be updated from time to time. Look through your owner’s manual or visit your closest Audi dealer to find out if there are available updates to the software. You can try updating your software and see whether it will fix the problems that you are having with your dashboard.
• Inspect Wiring: If you are a little familiar with electrical systems in vehicles, you might consider checking the wires that are connected to the dashboard. The display may flicker or fail if the connections are loose or not connected properly. Always remember to disconnect the battery when servicing the car in order to avoid electric shocks or additional harm.
• Scan Fault Codes: Most dashboard problems are related to or caused by other problems within the car’s internal systems. One way is to use an OBD-II scanner to check whether or not there are any error codes that signify a problem. If a sensor or a module is faulty, the code will assist the user in identifying which of them has a problem.
• Replace Faulty Sensors: If the displayed information, such as the speed and fuel level, on the car’s dashboard seems to be wrong, it may mean that sensors are failing. A mechanic can advise which sensors are causing the issue and which needs to be replaced.

When to Seek Professional Help

Some dashboard problems can be solved on your own while others will need the services of a professional. If you still cannot define what could have gone wrong, or if the problem is still persisting after the steps outlined above, it is time to go see an expert. Digital dashboards are complicated systems and should not be repaired without the necessary knowledge and tools.

Why You Should Trust Tanner Motors With Your Audi Repairs

At Tanner Motors, we are the company you should trust if you want to fix your Audi’s digital dashboard problems. We have a team of highly skilled technicians, who can easily identify the cause of the issue and fix it in order to bring your dashboard back to order.

It doesn’t matter if you’re facing a wiring problem, sensor failure, or even a software problem – we have the equipment and knowledge to address all of them. Based in Phoenix, AZ, we are the best Audi repair shop for all your repair needs. Call us today to book an appointment and fix your Audi’s dashboard issues!

* Man Driving Audi Car image credit goes to: Evgenia Parajanian.